Brymill Cryochamber 6mm 104-6

Brymill Cryochamber 6mm 104-6

When physicians are deeply treating an area of skin during a cryosurgical procedure, Brymill’s cryochambers confine the liquid nitrogen spray to the area so that it pools precisely and delivers a better outcome for patients. All Brymill cryochambers are fully autoclavable. For best results, we recommend using either the right-angle adapter or malleable extension with our cryochambers.

OPERATING INSTRUCTIONS
Place the open edge of the Chamber on the surface of the tumor to be treated. Make certain that the entire 360 degree edge is sealing on the surface. A more uniform freeze will be achieved if the Chamber is held in a vertical position, therefore, we have included the Malleable Extension to facilitate this. If the vertical position is maintained, the pool of liquid nitrogen will create an extremely deep symmetrical freeze.

CAUTIONS
The vent tube should be pointed in a safe direction away from the operator and the patient. As the freezing progresses, a wet liquid level line will appear on the outside of the Chamber. This line can be maintained with intermittent pressing of the trigger on your CRY-AC, CRYOGUN or KRYOSPRAY II Unit. It does not have to be filling the Chamber continually. This will require a pressure of 1 to 2 pounds.
We emphasize the depth of 3cm to 4cm of destruction may be achieved, therefore significant caution should be taken

Ordering Info:

• Brymill Cryochamber 6mm 104-6
• Brymill Cryochamber 10mm 104-10
• Brymill Cryochamber 15mm 104-15
• Brymill Cryochamber 18mm 104-18
• Brymill Cryochamber 31mm 104-31